11 Jun 2006 - 1.6hrs
Start looking at the aileron assembly process and getting the parts ready.
I'm going to try to build both ailerons at the same time. I think this should help things to move along better.
12 Jun 2006 - 2hrs
Debur, debur, debur...
13 Jun 2006 - 1.5hrs
and more debur... Mark centerlines on ribs, etc.
15 Jun 2006 - 3.25hrs
16 Jun 2006 - 5hrs
Put the skins on.
17 Jun 2006 - 3.75hrs
Doublers, inspection holes. More skin work.
20 Jun 2006 - 1.25hrs
25 Jun 2006 - 2.75hrs
Getting way to hot to work in the shop (over 100F at times). Time to take a break for the summer, I think.
09 Sep 2006 - 6.25hrs
Things are finally starting to cool down, and I'm able to keep the shop under 85 degrees or so.
I've mounted the anti-servo tab and worked through Steps 16 through 20 today.
10 Sep 2006 - 5.5hrs
Install the electric aileron trim tab and servo.
11 Sep 2006 - 0.5hrs
Misc stuff on mounting the servo.
16 Sep 2006 - 2hrs
Tabs - debur, clean.
17 Sep 2006 - 7hrs
Debur, dimple.
19 Sep 2006 - 1.5hrs
Dimple, clean.
20 Sep 2006 - 1.25hrs
Priming.
22 Sep 2006 - 1.5hrs
Priming.
23 Sep 2006 - 4.5hrs
Debur, clean, prime.
24 Sep 2006 - 5hrs
Prime, rivet nutplates, hinge brackets, trim tabs.
25 Sep 2006 - 2.5hrs
Rivet nose and aft ribs. Step 32 should be between steps 29 and 30.
26 Sep 2006 - 2.25hrs
29 Sep 2006 - 2.5hrs
30 Sep 2006 - 1.5hrs
01 Oct 2006 - 6.75hrs
06 Oct 2006 - 1hrs
07 Oct 2006 - 6hrs
08 Oct 2006 - 4hrs
Finish up ailerons.
09 Oct 2006 - 1hrs
Ailerons complete!!! :-)